Attic Spray Foam Insulation Tybee Island, GA 31328

Spray Foam Insulation in Tybee Island, GA (31328) · Local Professionals

Savannah Spray Foam Insulation · Fast response in Tybee Island and the Savannah area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+36Verified Reviews

16Years in Business

4.9 ★Google Rating

24/7Available

Tybee Island's beach houses face salt air, wind-driven rain, and Atlantic humidity year-round, and that moisture finds its way into attics, crawl spaces, and wall cavities faster than anywhere else in the Savannah area. Most Tybee homes sit on raised foundations with vented crawl spaces that pull in damp coastal air, or have attics that bake through long cooling seasons while pulling moisture in through every gap and seam. Savannah Spray Foam Insulation has been sealing and insulating Tybee Island properties since 2010, and we know exactly where the air leaks and moisture problems hide in a coastal raised-foundation home.

Homeowners in ZIP 31328 call us when their cooling bills stay high even after the AC runs all day, when a bedroom stays damp or cold no matter what the thermostat says, or when they find wet insulation and condensation in the crawl space or attic. We handle the spray foam insulation and air sealing that stops the leak, and we do it the right way: controlled application, proper ventilation during cure, and a clear re-entry window so your family is safe.

Spray Foam Insulation in Tybee Island (31328)

Tybee Island's housing stock is a mix of older beach cottages and mid-century homes on pilings, newer stick-framed construction, and a growing number of raised rentals. Nearly all of them sit on vented crawl spaces or piers that expose rim joists and band joists to the Atlantic air. Attics in these homes are often tight, humid, and poorly sealed, with ductwork running through them and pulling in outside air on the return side. Closed walls rarely have any cavity insulation, and when they do, it settles or absorbs moisture over time. The combination of salt air, high humidity, and hurricane-season wind-driven rain means every air gap and every uninsulated cavity becomes a moisture highway into the structure.

We have been spraying attics, crawl spaces, rim joists, and closed cavities across Tybee Island and the greater Savannah area for over a decade. We know the building codes and permit requirements that apply in your ZIP code, we work with fully insured crews, and we understand the urgency: a damp crawl space or a leaking attic does not fix itself, and the longer you wait, the more damage spreads.

Our services in Tybee Island

Attic Spray Foam Insulation in Tybee Island · Savannah attics bake through long, humid cooling seasons…
Closed Cell Spray Foam Insulation in Tybee Island · Closed cell spray foam gives Savannah's humid crawl spaces and rim joists a…
Open Cell Spray Foam Insulation in Tybee Island · Open cell spray foam fills stud cavities in Savannah's new subdivision walls…
Wall & Injection Foam Insulation in Tybee Island · Wall injection foam fills hidden stud cavities in Savannah's century-old frame…
Crawl Space Spray Foam Insulation in Tybee Island · Savannah's raised crawl spaces under older homes pull in damp coastal air that…
Rim Joist & Band Joist Spray Foam in Tybee Island · Rim and band joists in Savannah's raised crawl-space homes are common weak…
Garage Spray Foam Insulation in Tybee Island · Garages in Pooler and Richmond Hill subdivisions bake through Savannah's long…
Metal Building & Barndominium Spray Foam in Tybee Island · Metal buildings and warehouses across Chatham County sweat and rust without a…
Commercial & New Construction Spray Foam in Tybee Island · New construction across Chatham…
Insulation Removal in Tybee Island · Old insulation in Savannah attics and crawl spaces traps decades of coastal…
Insulation Replacement & Re-Insulation in Tybee Island · Savannah homes with aging insulation lose the fight against humid coastal air…
Air Sealing in Tybee Island · Hurricane season winds and year-round humidity push air through gaps in…

How a Job Works in Tybee Island

We start with a free on-site assessment. One of our team members will visit your property, walk the attic or crawl space, identify the leaks and moisture sources, and explain what has to happen first. If there is wet insulation, contaminated material, or standing water, we tell you plainly: we fix the moisture first or we walk away. We give you a written estimate with R-value and thickness specifications so you know exactly what you are getting and why.

On the day of the work, we set up mechanical ventilation to keep the space safe during application and cure. We spray the foam to the thickness and density you approved, seal all the air gaps around rim joists, band joists, ductwork, and electrical penetrations, and we work around your family's schedule. If you are living in the house, we let you know the re-entry window: typically twenty-four to forty-eight hours before the space is safe to occupy again. We coordinate with any other trades on site (roofers, HVAC crews, electricians) so the work flows without conflict.

When we are done, we clean up every scrap of material and packaging, walk through the finished work with you, and answer any questions about what we sprayed and why. You get a record of the job so you have documentation for any future inspections or insurance claims.

Attic spray foam insulation in Tybee Island typically runs from $1.50 per square foot for open cell foam to $1.20 per board foot for closed cell, depending on the R-value you need, the thickness required by code, and what has to be removed first. A crawl space job usually starts at $2,500 and climbs with the square footage and the moisture remediation required. Rim joist and band joist sealing runs from $650 for a small section to several thousand for a full perimeter. Insulation removal, if old material has to come out before anything goes in, starts at $950. The real cost drivers are the area to cover, whether we are removing contaminated insulation first, the R-value and thickness your building code requires, and whether you choose open cell (faster, cheaper, more breathable) or closed cell (denser, more moisture-resistant, better for coastal applications). We give you a free estimate over the phone at (912) 483-1976, and we send a crew to your property to measure and quote in writing before any work starts. No surprises, no change orders.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Tybee Island and nearby areas.

Why does my attic get so hot and humid in summer, and why does my AC run all day without cooling the house down?

Tybee Island attics are typically vented, which means outside air (hot, humid, salt-laden) flows through soffit vents, ridge vents, and gable vents all day and night. That outside air mixes with your conditioned air leaking up through ceiling gaps, ductwork seams, and light fixtures. The result is a hot, humid attic that pulls heat down into your living space and makes your AC work twice as hard. Spray foam insulation seals the attic floor and all the air leaks, stops the outside air from mixing with your cooled air, and drops your cooling bills. On top of that, closed cell foam resists moisture, so even in hurricane season when the humidity spikes, your attic stays dry.

I found wet insulation and condensation in my crawl space. Do I need to remove the insulation before you spray foam?

Yes. Wet or contaminated insulation has to come out before any foam goes in. We will not spray over a damp substrate, and we do not promise that foam will fix a moisture problem that is still active. If you have standing water, a roof leak, or a foundation crack, those have to be addressed first, or we walk away. Once the crawl space is dry and the source of the moisture is stopped, we remove the old insulation and spray closed cell foam on the rim joists, band joists, and foundation walls. This creates a sealed, dry crawl space that stops the Atlantic air from pulling damp into your home. Call us at (912) 483-1976 and we will assess the moisture situation and tell you what has to happen first.

What is the cost to spray foam an attic or crawl space in Tybee Island, and what affects the price?

Attic foam starts around $1.50 per square foot for open cell and $1.20 per board foot for closed cell, depending on the R-value and thickness your building code requires. A typical attic runs anywhere from $3,000 to $8,000 or more. Crawl spaces start at $2,500 and can run $5,000 to $10,000 depending on the foundation perimeter and whether insulation has to be removed first. The biggest cost factors are the square footage, the R-value (higher R means thicker foam), whether you need open or closed cell, and whether old insulation has to come out. Salt-air corrosion on metal ducts and rim joists sometimes adds cost too. Call us at (912) 483-1976 for a free phone quote, and we will send a crew to measure and give you a firm written estimate.

Who decides what R-value and thickness I need, and do I have to get a permit in Tybee Island?

The energy code and building code in force at your address set the R-value and thickness requirements, and the building official in Tybee Island enforces them. We follow the code that applies to your property and include the R-value and thickness in every written estimate. Some jobs need a permit, some do not, and it depends on what you are doing and where your house is located. Your local building department can tell you what applies at your address, and you can verify the permit and inspection rules on the City of Tybee Island website or by calling the building department. We will coordinate with the inspector if a permit is required. The thermal barrier and ignition barrier rules are part of the code too, and we install the foam and any required barriers correctly the first time.

Can we live in the house while the spray foam is being applied, and how long before we can go back in the attic or crawl space?

Yes, you can stay in the house during the work. We set up mechanical ventilation to pull fumes out of the space during application and cure, and we keep the doors and windows open as needed. The re-entry window for most spray foam is twenty-four to forty-eight hours after application, depending on temperature and humidity. We tell you the exact re-entry time when we schedule the job. After that, the foam is cured and safe. If you have a rental property or a multi-unit building on Tybee Island, we coordinate the schedule and the re-entry window so tenants are not displaced.

Is your crew fully insured, and what coverage do you carry?

Yes, we are fully insured with general liability and workers' compensation coverage. Every crew that works on your Tybee Island property is covered, so if anything goes wrong, you and your property are protected. We carry the insurance you need and we can provide proof of coverage before the work starts.

When is the best time of year to have spray foam insulation done in Tybee Island?

The best time is spring or fall, when the weather is mild and the humidity is lower. Summer heat and humidity slow the cure time and make the work harder on the crew. Hurricane season (June through November) can interrupt scheduling, and winter is mild here but can still bring damp weather. If you have a damp crawl space or a leaking attic right now, do not wait for perfect weather. The longer the moisture sits, the more damage spreads. We work year-round and we will get you on the schedule as soon as possible.